Exsenco U.S Contact For Santest

 

GYcRP-H

 

Photograph 3
The GYcRP-H probe is the hot corresponding type probe of the HeavyDuty specification which was developed on the basis of the result of GYcRP type. You use the component which was closely examined to the sensor probe, cover to the 350℃. You can choose the probe from the below-mentioned 4 types with temperature. However because it is below the 65℃, the head section cooling it does the category temperature range of the probe head section, or heat sink type (option) the increases. In addition also it is possible furthermore to make the temperature drift small, with 2 magnetic systems which provide the standard magnet in the probe. You use the controller combining with GYFC2 or GYDC-03A.
 3
3
3
 
3

Specifications
3
Precision Linearity Below TYP ±0.05%FS
Resolution Below 0.01%FS
Repeatability Below ±0.01%FS (GYcRP-** **-H0)
Below ±0.05%FS (GYcRP-** **-H1 - 3)
Temperature characteristic (probe) (1 magnetic systems) (standard)
±50ppm FS/℃ (GYcRP-** **-H0)
±70ppm FS/℃ (GYcRP-** **-H1 - 3)
(2 magnetic systems)
±20ppm FS/℃ (GYcRP-** **-H0)
±40ppm FS/℃ (GYcRP-** **-H1 - 3)
Environmental characteristic Resisting pressure 35MPa (probe rod)
Specification temperature range Probe head section -5℃ - +65℃
Probe rod - 100℃ (GYcRP-** **-H0)
　　　　　　　　　 - 120℃ (GYcRP-** **-H1)
　　　　　　　　 　- 200℃ (GYcRP-** **-H2)
　　　　　　　　　 - 350℃ (GYcRP-** **-H3)
Controller 0℃ - +60℃
Resistance swing 6G (or 40Hz 2mmPP)
Anti- impact 50G (2msec)
Protective standard IP65 (probe)
Cable 1.5m (standard) (Max200m)
* The above-mentioned precision is applied to the sensor above effective stroke 300mm.

- Please choose the magnet from T14-M2 and T16-M2.
- The ferrite magnetic single item (the holder is not) also supply is possible other than the above-mentioned magnet. Please produce the holder with the nonmagnetic material.
- The float in case of use please choose SUS make. 3

Type Variations
3
3
 
GYcRP-□□□□-H□
1 Effective stroke (mm)
3 300,500,700,1000,1500,2000
2 Probe rod temperature
3 0:100 & 1:120 & 2:200 & 3:350 ℃
3

External Dimensions Drawing
3
3 ●GYcRP-H probe (normal mode)
3
3 Material probe head: Aluminum alloy
　　　Probe rod: SUS304
GYcRP-H probe (normal mode)
3
3 ●GYcRP-H probe (heat sink type)
3
3 Material probe head: Aluminum alloy
　　　Probe rod: SUS304
GYcRP-H probe (heat sink type)
3
3 ●GYcRP-H probe (heat sink flange type)
3
3 Material probe head: Aluminum alloy
　　　Probe rod: SUS304
GYcRP-H probe (heat sink flange type)
3
3 Note) the float in case of use, actual liquid level position differs depending upon the relative importance and liquid relative importance of the float.