GYcRS

		As for the GYcRS probe with the adoption of the advanced signal detection element linearity, with the probe which improves each precision of resolution and temperature characteristic it is the high performance series which can obtain high accuracy analog digital output with the combination use of the GYEC-21 analog controller and the GYDC-07 digital controller. The GYEC-21 controller actualized miniaturization in comparison with the former analog controller, adopted the DIN rail for installation, made field work such as Terminal Block connection easy. Alarm output in order cable broken wire and to detect magnetic falling off, early of the system contributes to restoration. The GYDC-07 controller the GYcRS advanced probe and actualized the high resolution 5 millimicron which exceeds the former GY sensor the measurement technology due to FPGA with. FPGA has made the high-speed digital count which is suitable to 500MHz possible, GYDC-07 loading all functions on the one board. It has become the compact design of DIN rail installation type. The GKS-01 controller is 7 segmented LED indicator equipped digital type controllers which can be connected with the GY sensor probe directly. Output the serial (standard) and parallel (option) has prepared 2 types. Indication other than 0.1mm of standard, with scaling function %, setting of inch and the like is possible. In addition, point output (the open collector) the signal can be set to 10 points.

Specifications

GYcRS probe GYEC-21 analog Controller GYDC-07 digital Controller Precision Linearity Below TYP ±0.025%FS Resolution Below 0.005%FS 0.1mm, 0.01mm and 0.005mm Repeatability Below ±0.01%FS Temperature characteristic Below 20ppm FS/℃ (probe) Below 20ppm FS/℃ (Controller)   Output Voltage output 　0 - 10VDC or 　10 - 0VDC Electric current output 　4 - 20mA or 　20 - 4mA Alarm output 　Open collector 　30V 0.1A Digital output 　20bit parallel 　(19bit+ mark) Cord/code 　Binary, Gray 　(BCD) Open collector 　50V 0.1A Scanning frequency 1kHz (standard) 2kHz (standard) (max5kHz) Power source and consumed electric current +24VDC below type 130mA +15VDC below type 190mA +12VDC below type 100mA 18 - 30VDC 0.25A (At the time of DC24V supply) Resisting pressure 35MPa (static pressure) (probe rod) Environmental characteristic Category temperature range Probe -20℃ - +80℃ Controller 0℃ - +60℃ Storage temperature range -40℃ - +80℃ Resistance swing 6G (or 40Hz 2mmPP) (probe) Shock resistant 100G (2msec) (probe) Protective standard IP65 (probe)

* The above-mentioned precision is applied to the sensor above effective stroke 300mm. Note) load current Max5mA of 1. voltage outputs, load resistance Min2kΩ and load resistance of electric current output are Max200Ω. 　　2. Voltage output of power supply voltage 12V type 0 - 5V or becomes 5 - 0V. 　　3. Electric current output and load resistance of power supply voltage 12V type become Max250Ω. 　　4. Power source 24V type (the ±5%), 15V type (+10%/-5%), +12V type (the ±5%) is. 　　5. 0 temperature range of the category temperature range has supposed the use at cold area. 　　　When only the probe rod low it becomes temperature, other way please consult.

GKS-01 digital controller Indication 6 columns, red 7 segmented LED letter height 15mm Indicatory range 999999 - 99999 Decimal point position: Option setting Scaling function % In inch and the like setting possibility Combination probe GYcRS, GYMR5 and GYKM-RS probe Supply power source +12V - +24VDC below ±10% 4W Pre-setting 1 point setting possibilities Serial output RS232C or RS485 Parallel output (Note 1) BCD/binary/Gray (change possibility) Sampling frequency 30 - It differs 100Hz (depending upon point output working condition) Point output Open collector 30V 20mA or less 10 points Category temperature range 0℃ - 45℃ Storage temperature range -20℃ - 70℃ Humidity range 20 - 90%RH (there is no dew condensation,) Weight GKS-01-SN…Approximately 330g GKS-01-SP…Approximately 380g

Note 1) Parallel output is manufacturer option. Please appoint beforehand.

Type Variations

	Effective stroke 300,500,700,1000,1500,2000 (max7500mm) Installation screw M: M24×P1 (standard) N: M18×P1.5 U: 3/4-16UNF Cable removal CN: Connector type (standard) G*: [piguteiru] type (* cable length [m]: Standard 1.5)

	Output B: 0 - 10V, 4 - 20mA C: In addition Effective stroke (mm) Supply power source Supply power source 24: +24V (standard) 15: +15V 12: +12V Operational direction (to rod point when moving) D: Increase operation R: Decrease operation

	Basic type 1: Standard 2: Incremental it comes out and regains one's strength 5: SSI it comes out and regains one's strength 6: Multiple magnet (maximum of 6) Incremental output   L: Low speed (standard) H: High speed Effective stroke (mm) Resolution D2: 0.1mm D4: 0.01mm D5: 0.005mm

	Output SN: Only serial output SP: Parallel coming out regaining one's strength * The output connector belongs respectively. * Effective length becomes max3000mm.

External Dimension Drawing

	●GYcRS probe
	Material probe head: Aluminum alloy probe rod: SUS304

	<[piguteiru] type (option)>

	●GYEC-21 controller (analog)

	●GYDC-07 controller (digital)

●GKS-01 indicator equipped controller (digital)

	Case material ABS resin (glass fiber entering)

It can produce the effective stroke of the probe at the optional length of 30mm - 7500mm. The cable the optional length to 200m is possible. When (it exceeds 200m, please consult. ) Please choose the magnet from No.2PN, No.φSPM and No.φLPM etc. GYEC-21 analog as for output fine control of zero/full scale points of controller controller front [to] 　It is possible to do with [rima]. (Adjustment range: ±3%FS) Output bipolar and reversal output etc is possible.