GYGS

 

		The GYGS probe the sensor head which builds in the detection element of new system (thickness 20mm) is the super thin-shaped series. It builds in to the hydraulic cylinder and various equipment, when it installs, it is possible to make the total length of the cylinder & the equipment short. 0 - 10V or you can obtain the analog signal 4 - 20mA with the combination with the GYGSC controller.

Specifications

Precision　 Linearity Below TYP ±0.025%FS Resolution Below 0.01%FS Repeatability Below ±0.01%FS Temperature characteristic ±40ppm FS/℃ (probe) ±50ppm FS/℃ (controller) Output　 0 - 10VDC voltage output (load resistance Min 2kΩ) or 4 - 20mA electric current output (load resistance Max 500Ω) Supply power source DC24V 0.1A Scanning frequency Approximately 1kHz Environmental characteristic Resisting pressure 35MPa (probe rod) Category temperature range Probe -20℃ - +80℃ Controller 0℃ - +60℃ Storage temperature range -40℃ - +80℃ Resistance swing 6G (or 40Hz 2mmPP) Shock resistant 50G (2msec) Protective standard IP 67 (10kPa and 30min) Cable 1.5m (standard) (option Max50m)

* The above-mentioned precision is applied to the sensor above effective stroke 300mm.

Type Variations
		Effective stroke (mm)
		Max3000mm
		Cable length (m)
		Standard 1.5m
		Cable taking coming out direction
		L: Radial type S: Axial direction type
		Output
		A: 0 - 10V B: 4 - 20mA C: In addition
		Effective stroke
		Operational direction (to rod point when moving)
		D: Increase operation R: Decrease operation
	* Please choose the magnet from No.2PN, No.φSPM and No.φLPM etc.

External Dimensions Drawing

●GYGS probe Material probe head: SUS304, Bs probe rod: SUS304 cable gland: Bs <Cable axial direction type (option)> <A section details> Cable removal direction of radial type is adjustment possible to optional direction. ●GYGSC controller - Magnet No.2PN (Holder material nylon 66) (color: White) No.ΦSPM (Holder material polyacetar) No.ΦLPM (Holder material polyacetar)